;-------------------------------------------------------------------------------------------- ; GSD Detail For Kaifeng Instrument Co., Ltd. Device on PROFIBUS PA" ; Date: 2023-05-05 ; File: KFYB11AA.gsd ; Ning Dekui ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; General DP keywords ;-------------------------------------------------------------------------------------------- #Profibus_DP GSD_Revision = 5 Vendor_Name = "Kaifeng Instrument Co.,Ltd." Model_Name = "LUXZ" Revision = "V2.00" Ident_Number = 0x11AA Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "1.2" Software_Release = "01.00" 31.25_supp = 1 45.45_supp = 1 93.75_supp = 1 MaxTsdr_31.25 = 100 MaxTsdr_45.45 = 250 MaxTsdr_93.75 = 1000 Redundancy = 0 Repeater_Ctrl_Sig = 0 24V_Pins = 0 Implementation_Type = "FBC0409/SIA Tech" Bitmap_Device = "KFYB11AA" OrderNumber = "********" Info_Text = "KFYB PA FlowMeter, PROFIBUS PA Profile 3.02 with 11 function block: 7 AIs, 4 DIs." ;--- Description of physical interface for async. and sync. transmission: --- Physical_Interface = 1 ; IEC61158-2 Transmission_Delay_31.25 = 0 Reaction_Delay_31.25 = 0 End_Physical_Interface ;-------------------------------------------------------------------------------------------- ; Basic DP-Slave related keywords ;-------------------------------------------------------------------------------------------- Freeze_Mode_supp = 1 Sync_Mode_supp = 0 Auto_Baud_supp = 0 ; 0 = no automatic baudrate recognition Set_Slave_Add_supp = 1 ; 1 = Set Slave AddrFunction supported Min_Slave_Intervall = 250 ; 25ms min. betw. 2 slave list cycles Modular_Station = 1 ; 1 = Modular Station Max_Module = 11 Max_Input_Len = 43 ; maximum Input Length Max_Output_Len = 0 ; maximum Output Length Max_Data_Len = 43 ; maximum In-Output Length Max_Diag_Data_Len = 15 Slave_Family = 12@KFYB ; 12 = PA Process Control Device Ident_Maintenance_supp = 1 ; I&M Function is supported Fail_Safe = 1 Prm_Block_Structure_supp = 1 Prm_Block_Structure_req = 1 Isochron_Mode_supp = 0 Isochron_Mode_required = 0 PrmCmd_supp = 0 PrmCmd_req = 0 Max_User_Prm_Data_Len = 8 Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x08,0x05,0x41,0x00,0x00,0x01 ; DPV1 parameters ; SetPrm is structured ; Structure_Length = 5 ; Structure_Type = 65 (profile specific) ; Slot_Number = 0 ; reserved = 0 ; PRM_COND=1 (enabled) ;----------- Description of extended DP features: --------------------- ; DPV1_Slave = 1 C1_Read_Write_supp = 1 C1_Max_Data_Len = 128 C1_Read_Write_required = 0 C1_Response_Timeout = 400 C2_Read_Write_supp = 1 C2_Max_Data_Len = 128 C2_Read_Write_required = 1 C2_Max_Count_Channels = 4 Max_Initiate_PDU_Length = 52 C2_Response_Timeout = 4000 DPV1_Data_Types = 1 ;------------------------------------------------------------------------------------------ ; Description of device related diagnosis ;-------------------------------------------------------------------------------------------- Unit_Diag_Bit(16) = "Error appears" Unit_Diag_Bit(17) = "Error disappears" Unit_Diag_Bit(24) = "Reserved by PI, fixed to 0" ;"Hardware failure electronics" Unit_Diag_Bit(25) = "Reserved by PI, fixed to 0" ;"Hardware failure mechanics" Unit_Diag_Bit(26) = "Reserved by PI, fixed to 0" ;"Motor temperature too high" Unit_Diag_Bit(27) = "Reserved by PI, fixed to 0" ;"Electronic temperature too high" Unit_Diag_Bit(28) = "Reserved by PI, fixed to 0" ;"Memory error" Unit_Diag_Bit(29) = "Reserved by PI, fixed to 0" ;"Measurement failure" Unit_Diag_Bit(30) = "Reserved by PI, fixed to 0" ;"Device not initialized" Unit_Diag_Bit(31) = "Reserved by PI, fixed to 0" ;"Device initialization failed" Unit_Diag_Bit(32) = "Reserved by PI, fixed to 0" ;"Zero point error" Unit_Diag_Bit(33) = "Reserved by PI, fixed to 0" ;"Power supply failed" Unit_Diag_Bit(34) = "Reserved by PI, fixed to 0" ;"Configuration invalid" Unit_Diag_Bit(35) = "Restart" Unit_Diag_Bit(36) = "Coldstart" Unit_Diag_Bit(37) = "Maintenance required" Unit_Diag_Bit(38) = "Reserved by PI, fixed to 0" ;"Characteristics invalid" Unit_Diag_Bit(39) = "Ident_Number violation" Unit_Diag_Bit(40) = "Maintenance Alarm" Unit_Diag_Bit(41) = "Maintenance Demanded" Unit_Diag_Bit(42) = "Function Check" Unit_Diag_Bit(43) = "Invalid process conditions" Unit_Diag_Bit(55) = "Extension Available" Unit_Diag_Bit(56) = "SIM Switch On" ;------------------------------------------------------------------------- ;Empty module Module = "Not in cyclic data transfer" 0x00 0 ; Module-Reference Info_Text = "No function block selected. Function disabled" EndModule ;Modules for Analog Input Module = "Analog Input (AI)short" 0x94 1 EndModule ;Modules for Analog Input Module = "Analog Input (AI)long" 0x42,0x84,0x08,0x05 2 EndModule ;Modules for Discrete Input Module = "OUT_D" 0x91 3 EndModule ;----------- Description of the module assignment: --------------------- ; SlotDefinition Slot(1) = "AI1-Flow" 2 0,1,2 Slot(2) = "AI2-FlowFrq" 2 0,1,2 Slot(3) = "AI3-TotFlwHiPlc" 2 0,1,2 Slot(4) = "AI4-TotFlwLoPlc" 2 0,1,2 Slot(5) = "AI5-SnsorDat1" 2 0,1,2 Slot(6) = "AI6-SnsorDat2" 2 0,1,2 Slot(7) = "AI7-SnsorDat3" 2 0,1,2 Slot(8) = "DI1-AlmHi" 3 0,3 Slot(9) = "DI2-AlmLo" 3 0,3 Slot(10) = "DI3-StdOperSel" 3 0,3 Slot(11) = "DI4-Fault" 3 0,3 EndSlotDefinition ;-------------------------------------------------------------------------------------------- ; Slave related keywords for Data Exchange with Broadcast ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for Isochronous Mode ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for PROFIsafe Profile ;-------------------------------------------------------------------------------------------- ;-------------------------------------------------------------------------------------------- ; Slave related keywords for extended parameterization ;--------------------------------------------------------------------------------------------